THI 2-0511M

DC/DC Converter THI 2M Series, 2 Watt • • • DIP-16 Package • Medical safety to UL 60601-1 and IEC/EN 60601-1 3rd edition, 2 x MOOP • • • Industrial safety to IEC/EN/UL 62368-1 Unregulated device I/O isolation 3000 VACrms rated for 300 Vrms working voltage ES 60601-1 IEC 60601-1 UL 62368-1 IEC 62368-1 Operating temp. range –25°C to +80°C The THI 2M series is a new range of ultra-compact 2W DC/DC-converters providing a high I/O-isolation voltage of 3000 VAC. With a reinforced I/O-isolation 3-years product warranty system this product is an economical solution for many applications in instrumentation, industrial controls, medical equipment and everywhere where supplementary- or reinforced insulation is required to meet requested safety standards. Full SMD-design with exclusive use of ceramic capacitors ensure a very high reliability and a long product lifetime. Models Order Code Input Voltage Range THI 2-0511M THI 2-0512M THI 2-0513M THI 2-0522M THI 2-0523M THI 2-1211M THI 2-1212M THI 2-1213M THI 2-1222M THI 2-1223M THI 2-2411M THI 2-2412M THI 2-2413M THI 2-2422M THI 2-2423M www.tracopower.com 4.5 - 5.5 VDC (5 VDC nom.) 10.8 - 13.2 VDC (12 VDC nom.) 21.6 - 26.4 VDC (24 VDC nom.) Output 1 Output 2 Vnom Imax 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 5 VDC 12 VDC 15 VDC +12 VDC +15 VDC 400 mA 165 mA 133 mA 83 mA 66 mA 400 mA 165 mA 133 mA 83 mA 66 mA 400 mA 165 mA 133 mA 83 mA 66 mA September 20, 2023 Vnom Efficiency Imax –12 VDC –15 VDC 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA –12 VDC –15 VDC 83 mA 66 mA typ. 66 % 66 % 66 % 72 % 73 % 66 % 66 % 66 % 74 % 75 % 66 % 66 % 66 % 74 % 75 % Page 1 / 4 THI 2M Series, 2 Watt Input Specifications Input Current - At no load 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: 5 Vin models: 12 Vin models: 24 Vin models: - At full load Surge Voltage Recommended Input Fuse Input Filter 60 mA typ. 30 mA typ. 15 mA typ. 580 mA typ. 240 mA typ. 120 mA typ. 9 VDC max. (1 s max.) 18 VDC max. (1 s max.) 30 VDC max. (1 s max.) 1'000 mA (slow blow) 500 mA (slow blow) 200 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal Capacitor Output Specifications Voltage Set Accuracy Regulation - Input Variation (1% Vin step) Ripple and Noise - Load Variation - Voltage Balance (symmetrical load) - 20 MHz Bandwidth Capacitive Load - single output single output models: dual output models: See application note: dual output models: 5 Vout models: 12 Vout models: 15 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Short Circuit Protection ±4% max. 1.5% max. 1.5% max. www.tracopower.com/overview/thi2m 1% max. 100 mVp-p typ. 150 mVp-p max. 330 µF max. 330 µF max. 330 µF max. 100 / 100 µF max. 100 / 100 µF max. 2 % of Iout max. (Operation at lower load will not damage the converter, but it may not meet all specifications) ±0.02 %/K max. Limited 0.5 s max., Automatic recovery Safety Specifications Safety Standards - IT / Multimedia Equipment - Medical Equipment - Certification Documents Pollution Degree Over Voltage Category CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 EN 60601-1 IEC 60601-1 ANSI/AAMI ES 60601-1 CSA-C22.2, No 60601-1 2 x MOOP (Means Of Operator Protection) MOPP (Means Of Patient Protection) www.tracopower.com/overview/thi2m PD 2 OVC II All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 THI 2M Series, 2 Watt General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage - Input to Output, 60 s Isolation Resistance Isolation Capacitance - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V Leakage Current Reliability Washing Process - Touch Current - Calculated MTBF Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight 95% max. (non condensing) –25°C to +80°C +105°C max. –50°C to +125°C 2.5 %/K above 60°C See application note: www.tracopower.com/overview/thi2m Natural convection (20 LFM) 5'000 m max. 50 - 100 kHz (PFM) 80 kHz typ. (PFM) Reinforced Insulation 300 VAC 3'000 VAC (acc. to 60601-1) 4'800 VAC (acc. to 62368-1) 6'000 VAC 10'000 MΩ min. 15 pF typ. 20 pF max. 2 µA max. 2'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Phosphor Bronze (C5191) Nickel (2 - 4 µm) Gold (75 - 125 nm), glossy Plastic Case PCB Mount THD (Through-Hole Device) DIP16 Lead-Free Wave Soldering 265°C / 10 s max. 5.1 g Thermal Impedance - Case to Ambient Environmental Compliance - REACH Declaration 22.5 K/W typ. www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 6f64113d-d09c-4fc3-bdc7-23c410b5b61a - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/thi2m All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 THI 2M Series, 2 Watt Outline Dimensions 8.6 3.8 (0.15) 0.5 (0.02) (0.34) Pinout 0.5 Pin Single Dual –Vin (GND) 1 –Vin (GND) 7 NC NC 8 NC Common 9 +Vout +Vout 10 –Vout –Vout 16 +Vin (Vcc) +Vin (Vcc) (0.02) NC: Not connected 23.8 7 8 10 9 bottom view 16 (0.53) 1 13.4 (0.12) 1.62 3.0 (0.100) (0.064) 2.54 (0.600) (0.400) 15.24 10.16 (0.94) Dimensions in mm (inch) Tolerances: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin tolerances: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4